Menu
Alles zurücksetzen

Asia Flow Chemistry Modules › FLLEX

PDFDruckenE-Mail
The Asia FLLEX (Flow Liquid Liquid EXtraction) module is the flow chemistry equivalent of a separatory funnel. Operating continuously, this aqueous work-up or extraction module initially mixes the organic product stream with an aqueous phase, then ...
Beschreibung

The Asia FLLEX (Flow Liquid Liquid EXtraction) module is the flow chemistry equivalent of a separatory funnel. Operating continuously, this aqueous work-up or extraction module initially mixes the organic product stream with an aqueous phase, then allows time for diffusion to occur before finally splitting the flow back to its constituent parts.

By using advanced membrane technology rather than gravity, the FLLEX can separate two phase mixtures that would be extremely difficult by typical techniques e.g. THF and an aqueous phase.
The Asia FLLEX can be manually controlled from its front panel or automated from a PC using the Asia Manager PC Software. The Asia FLLEX module requires the Asia Pressure Controller

FLLEX Specifications:

Maximum organic/aqueous rate: 250 - 500µl/min
Wetted materials: Glass, PTFE, PFA and PEEK
Internal volume: 100µl
Cross membrane pressure range: 0 - 500 mBar
BPR pressure range: 1 - 9 bar
Input gas supply (from Asia Pressure Controller): 4 - 10 bar
FLLEX Features and Benefits:

Integrates aqueous work-up immediately after synthesis and therefore reduces impurities from product degradation
Unique – the only commercially available flow aqueous work up system at lab scale
Reduced emulsions compared to traditional separation funnels. Can form micro droplets which lead to difficult to separate emulsions, the FLLEX controls bubble size, reducing emulsion formation
Rapid partitioning and phase separation
Compact
Ideal for preparation of samples before sending to analysis e.g. via Sampler and Dilutor module
Works with organic solvents that are either more or less dense than water, e.g. DCM, Ethyacetate.
Uses of the FLLEX
“We have employed the Syrris FLLEX module as a "copper extraction device". The flexibility to connect the FLLEX module to our existing microflow apparati was key for success in this project.”
“This was the first published application from our group concerning the FLLEX system and more is still in the pipeline.”
Dr. Timothy Noël (Eindhoven University of Technology, Netherlands)

The original content can be found here.

Location
Location or origin place of the product.

Kundenrezensionen

Es gibt noch keine Rezensionen für dieses Produkt.